How to Care for Company Logo Jackets: 9 Practical Rules

Jackets with a company logo work for the brand not only when they are new. Their appearance after several months of wear also affects how the team is perceived, so care should not be limited to ordinary washing. You need to protect the material, cut and branding—print, embroidery, patch or reflective element. See how to care for company jackets so they remain neat-looking for longer and retain their practical function.

Check the care label and the type of logo

Start with the manufacturer’s care label, as it specifies the washing temperature, drying instructions and whether ironing is allowed company jackets with logos. You should also consider how the logo was made. Embroidery, print, patch and reflective foil may react differently to friction, detergents and heat.

If you are unsure how to care for the branding, ask the decorator for brief instructions. This is safer than testing the logo’s resistance during the first wash. You can find sample information about garment branding at the LOGOS Dystrybucja store.

Do not wash the jacket after every wear

A company jacket may be worn every day, but it does not always require a full wash. If there is no heavy dirt, it is often enough to air it out, wipe it with a damp cloth or remove an individual stain.Washing too often wears down the material, membrane, insulation and logo more quickly.

Before washing:

fasten zippers, hook-and-loop closures, snaps and pockets;
empty the pockets and remove sand or dried mud;
detach additional elements if the manufacturer permits it;
turn the jacket inside out if its construction allows it;
do not wash it with heavy fabrics or garments with sharp details.

Choose the programme and detergent for the material

Most jackets with logos are best washed at a low temperature, in accordance with the care label. A delicate programme reduces friction, so it works well for branded clothing. Do not overload the washing machine—the jacket needs room to rinse properly.

Choose the detergent for the fabric. For ordinary polyester jackets, a mild bleach-free product is sufficient. For softshells, waterproof jackets and membrane models, a detergent for technical clothing is a better choice. Fabric softener may reduce the material’s breathability and weaken its protective properties.

Dry without a radiator or hot air

The safest option is to dry the jacket naturally in a well-ventilated place. A radiator, direct sunlight and high temperatures in a dryer may damage the appearance of the material, bonded elements, insulation or logo. Before hanging it up, arrange the jacket so that the branding is not sharply folded.

Heavier models are best dried on a wide hanger or flat, if the manufacturer recommends it. A thin hanger may deform the shoulders, especially when the jacket is wet and heavy.

Do not iron directly over the logo

The logo should not come into contact with a hot iron. If the jacket needs ironing, check the care label, set a low temperature and iron it from the inside or through a thin cotton cloth. For technical jackets, do this only if the manufacturer allows ironing.

In many cases, carefully hanging the jacket after washing is better than smoothing it with an iron. This applies especially to softshells, membrane jackets and models with reflective elements.

Remove stains locally

Company jackets often get mud, dust, grease, food or cosmetic marks on them. For a small stain, use a damp cloth and a mild product, and only then decide whether a full wash is necessary.

Do not scrub the area with the logo. Strong friction may damage the print, cause the fabric to pill or weaken the embroidery threads. If the stain is close to the branding, test the product first on a less visible part of the jacket.

Store jackets without crushing the logo

Jackets with logos are best stored on hangers, especially when they have insulation, a membrane, a hood or a larger print on the back. Folding them tightly may cause permanent creases and folds in the branding area.

Before putting the jacket away for the next season, make sure it is clean and completely dry. Moisture encourages unpleasant odours and may worsen the condition of the material.

Prepare brief instructions for employees

Company jackets start to look inconsistent more quickly when everyone washes them differently. Brief instructions provided with the jacket reduce accidental mistakes and help keep the set in a similar condition.

You can include:

wash according to the care label;
do not use bleach;
do not dry on a radiator;
do not iron the logo;
remove stains locally;
store the jacket dry and hanging.

Check the condition of the jackets before the season

Before winter, the transitional season or a major company event, check the logo, zippers, hook-and-loop closures, seams, hoods, drawstrings and visible abrasions. The jacket may still protect against the cold, but if the branding is cracked, peeling off or heavily dulled, it no longer represents the company well.

Regular inspections make it possible to replace individual pieces. This is more convenient than ordering new clothing only when most of the jackets are already heavily worn.

Summary

The best way to care for jackets with company logos is to protect the material, cut and branding at the same time. Gentle washing, a suitable detergent, drying without high heat, local stain removal and storage without crushing the logo are most helpful. When there are more jackets, it is worth preparing brief instructions for employees. This helps the clothing remain consistent and neat-looking for longer while continuing to support the company’s image.

How to Care for Jackets with a Company Logo: 9 Rules